Assemble Elegoo Smart Car Robot KIT 2.0 Step 12: Start Connecting The Cables

Few of months ago the great folks at Elegoo sent me a beautiful Robot Kit Version 1.0.
I already posted Assembly Instructions, and some tutorials on programming it.
Since then Elegoo introduced a newer and simpler to assemble 2.0 version, and the Elegoo folks just sent me this really beautiful Smart Car Robot KIT Version 2.0 donated for the Visuino development.

I already posted:

Unboxing video
Step 1: Assembling the Motors.
Step 2: Installing the Motors on the Chassis
Step 3: Installing the Motor Driver Board
Step 4: Installing the Line Following Sensors
Step 5: Installing the Arduino Board and the Sensors Shield
Step 6: Installing  the Infrared Remote Receiver Module
Step 7: Installing the Battery Box on the Chassis
Step 8: Installing the Servo turning the Ultrasonic Ranger
Step 9: Assemble the Ultrasonic Ranger
Step 10: Installing the Ultrasonic Ranger on the Servo
Step 11: Installing the Standoffs/Spacers on the Chassis

Here is the 12th Assembly Video - Start Connecting The Cables between the sensors, and the boards:

I am preparing the rest of the Assembly videos and will post them in the following days. I have also already mapped the Robot's Shield functionality in Visuino, and I have done few projects with it :-) . Even had a chance to show it programmed for Bluetooth control yesterday at the Hackaday event in Pasadena.
Hopefully soon I will try to make some Visuino tutorials for the Robot.

Cheers,
  Boian

#Visuino #Arduino #Elegoo