Assemble SNARM500/SNAM1900 4DOF Arduino Robot Manipulator Arm - Step 5 - Assemble the Joints

   I have finished the 5th assembly video on the Arduino Robot Manipulator Arm .

The Manipulator is based on the original MeArm manipulator: http://learn.mearm.com/

I already posted :

Unboxing Video
Step 1: Assemble the Base
Step 2: Assembly Video - Install the side servos
Step 3: Assembly Video - Assemble the Servos Block
Step 4: Assembly Video - Prepare and Install the Rotating Base

And here is the 5th Assembly Video - Assemble the Joints

I am preparing the rest of the Assembly videos and will post them in the following days.

After that I will try to make some Visuino tutorials for the Manipulator.

Cheers,
  Boian

#Visuino #Arduino #Robot

Assemble SNARM500/SNAM1900 4DOF Arduino Robot Manipulator Arm - Step 4 - Assemble the Servos Block

  I have finished the 4th assembly video on the Arduino Robot Manipulator Arm .

The Manipulator is based on the original MeArm manipulator: http://learn.mearm.com/

I already posted :

Unboxing Video
Step 1: Assemble the Base
Step 2: Assembly Video - Install the side servos
Step 3: Assembly Video - Prepare and Install the Rotating Base

And here is the 4th Assembly Video - Assemble the Servos Block .

I am preparing the rest of the Assembly videos and will post them in the following days.

After that I will try to make some Visuino tutorials for the Manipulator.

Cheers,
  Boian

#Visuino #Arduino #Robot

Assemble SNARM500/SNAM1900 4DOF Arduino Robot Manipulator Arm - Step 3 - Prepare and Install the Rotating Base

 I have finished the third assembly video on the Arduino Robot Manipulator Arm .

I already posted :

Unboxing Video
Step 1: Assemble the Base
Step 2: Assembly Video - Install the side servos

And here is the third Assembly Video - Prepare and Install the Rotating Base assemble the central joint and install the rotating base on the baseplate servo.

Here is how to make Visuino project to center the sero. Just add and connect servo component. It will automatically set the servo to centered position:

Here is the Visuino project that I used:

https://www.visuino.com/installs/ZeroRobotManipulatorServo.zip

I am preparing the rest of the Assembly videos and will post them in the following days.

After that I will try to make some Visuino tutorials for the Manipulator.

Cheers,
  Boian

#Visuino #Arduino #Robot

Assemble SNARM500/SNAM1900 4DOF Arduino Robot Manipulator Arm - Step 2 - Install the side servos

I have finished the second assembly video on the Arduino Robot Manipulator Arm .

I already posted :

Unboxing Video
Step 1: Assemble the Base

And here is the second Assembly Video - Install the side servos assemble the 2 sides of the robot, and install the servos on them.

I am preparing the rest of the Assembly videos and will post them in the following days.

After that I will try to make some Visuino tutorials for the Manipulator.

Cheers,
  Boian

#Visuino #Arduino #Robot

Assemble SNARM500/SNAM1900 4DOF Arduino Robot Manipulator Arm - Step 1 - Assemble the Base

Recently I bought an Arduino Robot Manipulator Arm to use for the Visuino development. Last week it arrived, and I assembled it.

The Robot Manipulator was a good price, and came with quite nice MG90S Metal Gear Servos, and it included original Arduino UNO, and quite handy Potentiometers Shield, however it also came without any assembly instruction :-( .

Once assembled however the Manipulator turned out to be way better than what I anticipated based on its price. I also added support for the included Shield in Visuino and even used the shield for few small experimental Visuino projects :-)

I already posted Unboxing Video for the Manipulator, and promised Assembly videos.

Here is the first Assembly Video - Assemble the Base

I am preparing the rest of the Assembly videos and will post them in the following days.

After that I will try to make some Visuino tutorials for the Manipulator.

Cheers,
  Boian

#Visuino #Arduino #Robot