Tuesday, February 28, 2017

Yesterday received an INA219 module generously donated by Edap Pl for the Visuino development!

Yesterday received this INA219 module generously donated by Edap Pl for the Visuino development :-)



Thank you Edap pl!

I am still overloaded with the Modbus development, but it is getting close to completion so in the next 2-3 days, I should be able to get back to adding support for the modules that I received recently, including this one!

Update: Here is the component already working in Visuino :-) :


#Visuino #Arduino

10 comments:

Kurt Roesener said...

Looks cool!

Edap pl said...

Hi i am very happy :-) one question
whether it is possible for you enc28j600 launched a module for using Modbus RTU? It can be very useful for my project that you create for visuino. Ethernet shield is not very convenient and enc 28j600 suitable for Modbus Ethernet perfect.

Boian Mitov said...

Hi Edap pl,

BTW: I have the INA219 working now :-) . Will be in the next build. If all goes well probably tomorrow :-) . I have enc28j60 module, and plan to support it. Not sure how different the enc28j600 is from enc28j60. Will see how it goes...
Cheers,
Boian

Edap pl said...

Cool. from what it was checking ina219 is 0.000 try decimal places of accuracy? Unfortunately, I do not know the difference between enc28j600 and enc 28j60. I used enc28j600 for Modbus RTU and acted on port 500 with HMI panels Weintek model emt. if you can show a screen shot of how it works Ina 219? Regards

Boian Mitov said...

Hi Edap pl,

Just added it in the blog post :-)
Now working to also add support for the AD9850, that was sent to me recently, and then will move to other modules and functionalities.
Cheers,
Boian

Edap pl said...

approx. if I can get to my Ina219 visuino to test?

Boian Mitov said...

Edap pl, just sent you installer over e-mail ;-) Enjoy!

Edap pl said...


Hey. Why ina 219 shows 400mA max
I do not see to set the max 3,5 And besides, everything works great! :)

Boian Mitov said...

Edap pl, I have not experimented enough, but the calculations are based on the value of R, and the voltage ranges etc. Try to play with some of the settings (Gain etc.) ;-)

Edap pl said...

Ok now is working perfect :) i use wrong settings