Yesterday received an INA219 module generously donated by Edap Pl for the Visuino development!

Yesterday received this INA219 module generously donated by Edap Pl for the Visuino development :-)

Thank you Edap pl!

I am still overloaded with the Modbus development, but it is getting close to completion so in the next 2-3 days, I should be able to get back to adding support for the modules that I received recently, including this one!

Update: Here is the component already working in Visuino :-) :

#Visuino #Arduino

Connecting the Camera Mount and the Manipulator Servos of the Kuman Robot

Recently I received this cool robot from Kuman donated for the Visuino development :-).

It has Remote WiFi control module, Camera, and 4 servos Manipulator.

The robot has 4 main parts that need to come together:

1. The Chassis
2. The Control and Wi-Fi boards
3. The Camera with its Pan and Tilt mount
4. The Manipulator

I already posted number of videos:

• Unboxing video - showing the robot coming out of the box, 
• how to assemble the Pan and Tilt Camera Mount, 
• how to install the Arduino, Motor Shield and the Servo Control Boards, 
• how to connect the Driving Motors to the Motor Shield, how to install the Camera on the Chassis, 
• how to install the Manipulator on the Chassis,
• how to install the Rechargeable Battery
• and how to connect the USB cables between the camera and the boards

Here is the next Assembly video showing how to connect the Camera Mount and the Manipulator Servos to the Servo Control board:

I am processing the recorded videos of the rest of the assembly, and will post them soon :-).

I have also started working on programming the robot with Visuino, and Visuino already has support for the Motor Driver Shield used in the Robot;

Cheers,

  Boian

#Visuino #Arduino

Yesterday received SparkFun nRF52832 from Cisco Garcia for the Visuino development!

Yesterday arrived another cool Microcontroller - SparkFun nRF52832 and SparkFun Beefy 3 - FTDI USB To Serial donated by Cisco Garcia for the Visuino development! Thank you Cisco!
It supports Bluetooth low energy (BLE), ANT, and Nordic’s proprietary 2.4GHz ultra low-power wireless communication – it even features on-chip NFC tag support!

I am still quite overloaded with adding Modbus support to Visuino, but I will try to add at least partial support for the module in the next few days :-)

#Visuino #Arduino

Connecting the USB cables of the Kuman Robot

Recently I received this cool robot from Kuman donated for the Visuino development :-).

It has Remote WiFi control module, Camera, and 4 servos Manipulator.

The robot has 4 main parts that need to come together:

1. The Chassis
2. The Control and Wi-Fi boards
3. The Camera with its Pan and Tilt mount
4. The Manipulator

I already posted number of videos:

• Unboxing video - showing the robot coming out of the box, 
• how to assemble the Pan and Tilt Camera Mount, 
• how to install the Arduino, Motor Shield and the Servo Control Boards, 
• how to connect the Driving Motors to the Motor Shield, how to install the Camera on the Chassis, 
• how to install the Manipulator on the Chassis,
• and how to install the Rechargeable Battery

Here is the next Assembly video showing how to connect the USB cables between the camera and the boards :

I am processing the recorded videos of the rest of the assembly, and will post them soon :-).

I have also started working on programming the robot with Visuino, and Visuino already has support for the Motor Driver Shield used in the Robot;

Cheers,

  Boian

#Visuino #Arduino

The first combined installer for all of the Mitov Software libraries - MegaLab is now available

For long time I have been asked if I can create a single install for all of the Mitov Software libraries.
Finally I have found some time to create and test such installer called Mega Lab, and here is the first publicly available Delphi/C++ Builder/RAD Studio version:

http://www.mitov.com/MegaLab_VCL_7.8.2.130.zip

I hope you will enjoy it! :-)

Cheers,

  Boian

#Delphi #OpenWire

Installing the Rechargeable Battery on the Kuman Robot

Recently I received this cool robot from Kuman donated for the Visuino development :-).

It has Remote WiFi control module, Camera, and 4 servos Manipulator.

The robot has 4 main parts that need to come together:

1. The Chassis
2. The Control and Wi-Fi boards
3. The Camera with its Pan and Tilt mount
4. The Manipulator

I already posted Unboxing video - showing the robot coming out of the box, how to assemble the Pan and Tilt Camera Mount, how to install the Arduino, Motor Shield and the Servo Control Boards, how to connect the Driving Motors to the Motor Shield, how to install the Camera on the Chassis, and how to install the Manipulator on the Chassis.
Here is the next Assembly video showing  how to install the Rechargeable Battery:

I am processing the recorded videos of the rest of the assembly, and will post them soon :-). After that, I will start working on programming the robot with Visuino.

Cheers,

  Boian

#Visuino #Arduino

Source code for my 4th "Artificial Intelligence with Delphi" article in the Blaise Pascal Magazine

My 4th Artificial Intelligence article is now published in the latest Blaise Pascal Magazine. 

Here is the source code of the article's projects:

http://www.mitov.com/PascalMagazineSimpleOCRTutorials.zip

In the article I used the latest IntelligenceLab features, added recently. They are not available in the official IntelligenceLab release, so if you want to follow the article, you should download and install the latest prerelease that I posted recently here:
http://labpacks.blogspot.com/2017/01/partial-port-of-most-of-mitov-software.html

You can get the magazine from the Blaise Pascal Magazine website here.

Stay tuned for more articles in Artificial Intelligence, Visuino and more :-)

#Delphi #OpenWire

The Delphi projects I created for Day 1 and and Day 2 of the IoT Boot Camp

  Hello Everyone,

Here are the Delphi projects I created for Day 1 and and Day 2 of the IoT Boot Camp organized by Mitov Software and Embarcadero:

http://www.mitov.com/IoTBootCamp_2017_DelphiProjects.zip



You can download the projects and open them in Delphi.

Here are also the Visuino projects that I posted few days ago:
http://www.mitov.com/BootCamp_2017_VisuinoProjects.zip

You can download the projects and open them in Visuino.

Replay of the IoT Bootcamp is already available here!

I hope you all enjoy the IoT Bootcamp!

Cheers,
  Boian

#Visuino #Arduino #Delphi

Happy Delphi and Valentine's day everyone!

Happy Delphi and Valentine's day everyone!
From me and from Visuino - An application with Delphi at its hearth:

Happy 22 Years of Delphi! What an exciting ride it has been... :-)

#Delphi

Installing the Manipulator on the Kuman Robot

Recently I received this cool robot from Kuman donated for the Visuino development :-).

It has Remote WiFi control module, Camera, and 4 servos Manipulator.

The robot has 4 main parts that need to come together:

1. The Chassis
2. The Control and Wi-Fi boards
3. The Camera with its Pan and Tilt mount
4. The Manipulator

I already posted Unboxing video - showing the robot coming out of the box, how to assemble the Pan and Tilt Camera Mount, how to install the Arduino, Motor Shield and the Servo Control Boards, how to connect the Driving Motors to the Motor Shield, and how to install the Camera on the Chassis.
Here is the next Assembly video, showing how to install the Manipulator on the Chassis :

I am processing the recorded videos of the rest of the assembly, and will post them soon :-). After that, I will start working on programming the robot with Visuino.

Cheers,

  Boian

#Visuino #Arduino

The Visuino projects I created for Day 1 and and Day 2 of the IoT Boot Camp

  Hello Everyone,

Here are the Visuino projects I created for Day 1 and and Day 2 of the IoT Boot Camp organized by Mitov Software and Embarcadero:

http://www.mitov.com/BootCamp_2017_VisuinoProjects.zip

You can download the projects and open them in Visuino.

Replay of the IoT Bootcamp is already available here!

I hope you all enjoy the IoT Bootcamp!

Cheers,
  Boian

#Visuino #Arduino #Delphi

Installing the Wi-Fi Camera on the Kuman Robot

Recently I received this cool robot from Kuman donated for the Visuino development :-).

It has Remote WiFi control module, Camera, and 4 servos Manipulator.

The robot has 4 main parts that need to come together:

1. The Chassis
2. The Control and Wi-Fi boards
3. The Camera with its Pan and Tilt mount
4. The Manipulator

I already posted Unboxing video - showing the robot coming out of the box, how to assemble the Pan and Tilt Camera Mount, how to install the Arduino, Motor Shield and the Servo Control Boards, and how to connect the Driving Motors to the Motor Shield.

Here is the next Assembly video, showing how to install the Camera on the Chassis:

I am processing the recorded videos of the rest of the assembly, and will post them soon :-). After that, I will start working on programming the robot with Visuino.

Cheers,

  Boian

#Visuino #Arduino

Just received an AD9850 DSS Signal Generator Module a gift for the Visuino development by Adrian Gall!

Just received another module donated by Adrian Gall for the Visuino development! An AD9850 DSS Signal Generator Module.
Thank you Adrian Gall for your persistent, and generous support for the development!

He even sent a SSD with resources on the module:

I am looking forward to work on adding support for this module in Visuino, as few people have already asked for this.

#Visuino #Arduino